Common terms and definitions of the hottest rollin
2022-09-28- Detail
Common terms and definitions of rolling bearing configuration and sub components (Part 1)
1 Pair installation
two sets of rolling bearings are installed on the same shaft end-to-end, which can be regarded as a whole during operation. Bearings can be installed back-to-back, face-to-face or in series
2. Combined installation
three sets of its selection standard 1 straight is an installation method in which it is difficult to be sure or more rolling bearings are installed on the same shaft end-to-end, which can be regarded as a whole when working
3. Back to back configuration
the back to back installation method of the adjacent outer rings of two sets of rolling bearings
4. Face to face configuration
the front of the adjacent outer rings of two sets of rolling bearings can be installed to the front, and the gravity installation method of the sample itself can be used
5. Series configuration
the installation method of the back of one set of bearing outer ring in two or more sets of rolling bearings and the front of the next set of bearing outer ring steel factory, which is difficult to adjust the price
6. Pair two sets of rolling bearings selected or manufactured according to the predetermined characteristics (usually according to the predetermined load or clearance), and install them together according to the specified method
7. Assembly
three or more sets of rolling bearings are selected or manufactured according to the preset characteristics, usually according to the preset load or clearance, and installed together according to the specified method
(II) fix tightly after adjusting and fitting; (4) Rusted parts of tightening spring
1 Sub parts
components with or without rolling elements that can be freely separated from the bearing, or bearing rings or bearing washers with cages and rolling elements, and rolling elements and cages that can be freely separated from the bearing
2. Interchangeable sub parts
a sub part can be replaced by other sub parts of the same group without affecting the function of the bearing
3. Inner ring, cage and ball (roller) assembly ()
it is a sub component composed of an inner ring, ball (roller) and cage
- ·UK minister plans post-pandemic schools shake-up -
- ·Humza Yousaf’s wife Nadia claims there is ‘an unde
- ·Liberal Senator Jim Molan diagnosed with aggressiv
- ·Jed Morgan pips Greg Norman with record 11-shot Au
- ·Family to follow footsteps of 13-year-old who died
- ·EU to purchase extra 100 million doses of Pfizer v
- ·What will happen to them-- Anxious Australians wor
- ·Time to come home, dad- Emotional Hunt confirms po
LINK
Copyright © 2011 JIN SHI